Saber mod list? - LucasForums

04-25-2004, 11:56 AM
#4

This is from the JA SDK

//Lightsaber configurations, use by name

NOTE: add new sabers by putting their entries in a .sab file in ext_data/sabers

defaults and explanations of fields:

//saber type
saberType SABER_NONE - what kind of saber to use ( SABER_SINGLE, SABER_STAFF)

//saber hilt
saberModel "models/weapons2/saber_reborn/saber_w.glm" - what saber hilt model to use

A note about saber hilt models: the surface names on saber models should *always* start with "w_", the code expects it.

customSkin "" - a .skin file to apply to the saber hilt model, if any (overrides saber hilt model's internal texture mapping)

soundOn "sound/weapons/saber/enemy_saber_on.wav" - turn on sound
soundLoop "sound/weapons/saber/saberhum3.wav" - loop sound (must be a .wav file)
soundOff "sound/weapons/saber/enemy_saber_off.wav" - turn off sound

//blades
numBlades 1 - how many blades it has (min of 1, max of 8)

A note about blade tags: each blade will be drawn from it's corresponding tag's position and in the direction (negative X axis in ModView) of that tag.
The naming of the tags must be as follows:
"tag_blade1" for the first blade. I made the code fall back to "tag_flash" if it can't find the tag_blades so that the code will still work pre-JKA sabers, but we you should always use the new name.
All following blades (if applicable) should be "tag_blade2", "tag_blade3", etc., to a maximum of 8 blades ("tag_blade8")

//saber length
//NOTE: these should be inputted in order - setting "saberLength" automatically sets all of the others to the same length
saberLength 32 - how long the saber's first blade should be (minimum of 4)
saberLength2 saberLength - how long the saber's second blade should be (minimum of 4)
saberLength3 saberLength - how long the saber's third blade should be (minimum of 4)
saberLength4 saberLength - how long the saber's fourth blade should be (minimum of 4)
saberLength5 saberLength - how long the saber's fifth blade should be (minimum of 4)
saberLength6 saberLength - how long the saber's sixth blade should be (minimum of 4)
saberLength7 saberLength - how long the saber's seventh blade should be (minimum of 4)
saberLength8 saberLength - how long the saber's eigth blade should be (minimum of 4)

//saber radius
//NOTE: these should be inputted in order - setting "saberLength" automatically sets all of the others to the same length
saberRadius 3 - how wide the saber's first blade should be (minimum of 0.25)
saberRadius2 saberRadius - how wide the saber's second blade should be (minimum of 0.25)
saberRadius3 saberRadius - how wide the saber's third blade should be (minimum of 0.25)
saberRadius4 saberRadius - how wide the saber's fourth blade should be (minimum of 0.25)
saberRadius5 saberRadius - how wide the saber's fifth blade should be (minimum of 0.25)
saberRadius6 saberRadius - how wide the saber's sixth blade should be (minimum of 0.25)
saberRadius7 saberRadius - how wide the saber's seventh blade should be (minimum of 0.25)
saberRadius8 saberRadius - how wide the saber's eigth blade should be (minimum of 0.25)

//saberColor - valid colors: random, red, orange, yellow, green, blue, and purple
//NOTE: these should be inputted in order - setting "saberColor" automatically sets all of the others to the same color
saberColor red - what color the saber's 1st blade should be
saberColor2 saberColor - what color the saber's 2nd blade should be
saberColor3 saberColor - what color the saber's 3rd blade should be
saberColor4 saberColor - what color the saber's 4th blade should be
saberColor5 saberColor - what color the saber's 5th blade should be
saberColor6 saberColor - what color the saber's 6th blade should be
saberColor7 saberColor - what color the saber's 7th blade should be
saberColor8 saberColor - what color the saber's 8th blade should be

//locked style
saberStyle none - what one style it's limited to, if any (fast, medium, strong, desann, tavion, dual, staff)

//NOTE: the "saberStyle" field stomps these next two - don't use them together, use the above one if you only want to allow ONE style (that style is given to the person using that saber)
saberStyleLearned none - what styles they should get when they are given this saber (they don't have to use these, but they become available if they didn't know them before)
saberStyleForbidden none - what styles *cannot* be used with this saber (it doesn't take the style from them, it just doesn't allow them to use these styles if they try)

//maxChain
maxChain 0 - how many moves can be chained in a row with this weapon (-1 is infinite, 0 is use default behavior)

//lockable
lockable 1 - whether or not it can be stuck in a saber lock

//throwable
throwable 1 - whether or not it can be thrown

//disarmable
disarmable 1 - whether or not it can be disarmed (dropped)

//blocking
blocking 1 - whether or not user will try to block incoming shots (shots always bounce off it, this just determines if the user *tries* to block with it)

//twoHanded
twoHanded 0 - whether or not it requires 2 hands (makes it restrict force powers but makes it stronger in locks or parries)

//force power restrictions
forceRestrict 0 - what force powers it restricts, use these keys, a seperate entry per power:
FP_HEAL
FP_LEVITATION
FP_SPEED
FP_PUSH
FP_PULL
FP_TELEPATHY
FP_GRIP
FP_LIGHTNING
FP_SABERTHROW
FP_SABER_DEFENSE
FP_SABER_OFFENSE
//new Jedi Academy powers
FP_RAGE
FP_PROTECT
FP_ABSORB
FP_DRAIN
FP_SEE

//lockBonus
lockBonus 0 - this pushes harder/weaker in saberlocks

//parryBonus
parryBonus 0 - this is stronger/weaker in a parry (harder to break, more likely to knockaway)

//breakParryBonus
breakParryBonus 0 - this is more/less likely to break a parry
breakParryBonus2 0 - for second blade style (see bladeStyle2Start below)

//disarmBonus
disarmBonus 0 - this is more/less likely to disarm another saber in a saberlock or knockaway
disarmBonus2 0 - for second blade style (see bladeStyle2Start below)

singleBladeStyle none - makes it so that you use a different style if you only have the first blade active

singleBladeThrowable 0 - makes it so that you can throw this saber if only the first blade is on

brokenSaber1 none - if saber is actually hit by another saber, it can be cut in half/broken and will be replaced with this saber in your right hand
brokenSaber2 none - if saber is actually hit by another saber, it can be cut in half/broken and will be replaced with this saber in your left hand

returnDamage 0 - when returning from a saber throw, it keeps spinning and doing damage

//===The following fields were added after retail version:========================================== =================================
//these values are global to the saber, like all of the ones above

//done in cgame (client-side code)
spinSound none - if set, plays this sound as it spins when thrown
swingSound1 - swingSound3 none - if set, plays one of these 3 sounds when swung during an attack - NOTE: must provide all 3!!!
fallSound1 - fallSound3 none - if set, plays one of these 3 sounds when weapon falls to the ground - NOTE: must provide all 3!!!
onInWater 0 - if set, weapon stays active even in water

//done in game (server-side code)
bounceOnWalls 0 - if non-zero, the saber will bounce back when it hits solid architecture (good for real-sword type mods)
moveSpeedScale 1.0 - you move faster/slower when using this saber
animSpeedScale 1.0 - plays normal attack animations faster/slower
boltToWrist 0 - if set, saber model is bolted to wrist, not in hand... useful for things like claws & shields, etc.

//replace certain anims
readyAnim none - anim to use when standing idle (use name of enum in anims.h or BehavEd's list)
drawAnim none - anim to use when drawing weapon (use name of enum in anims.h or BehavEd's list)
putawayAnim none - anim to use when putting weapon away (use name of enum in anims.h or BehavEd's list)
tauntAnim none - anim to use when hit "taunt" (use name of enum in anims.h or BehavEd's list)
bowAnim none - anim to use when hit "bow" (use name of enum in anims.h or BehavEd's list)
meditateAnim none - anim to use when hit "meditate" (use name of enum in anims.h or BehavEd's list)
flourishAnim none - anim to use when hit "flourish" (use name of enum in anims.h or BehavEd's list)
gloatAnim none - anim to use when hit "gloat" (use name of enum in anims.h or BehavEd's list)

//optionally disallow certain types of moves and attacks
noRollStab 0 - if set, cannot do roll-stab move at end of roll
noPullAttack 0 - if set, cannot do pull+attack move (move not available in MP anyway)
noBackAttack 0 - if set, cannot do back-stab moves
noStabDown 0 - if set, cannot do stabdown move (when enemy is on ground)
noWallRuns 0 - if set, cannot side-run or forward-run on walls
noWallFlips 0 - if set, cannot do backflip off wall or side-flips off walls
noWallGrab 0 - if set, cannot grab wall & jump off
noRolls 0 - if set, cannot roll
noFlips 0 - if set, cannot do flips
noCartwheels 0 - if set, cannot do cartwheels
noKicks 0 - if set, cannot do kicks (can't do kicks anyway if using a throwable saber/sword)
noMirrorAttacks 0 - if set, cannot do the simultaneous attack left/right moves (only available in Dual Lightsaber Combat Style)

//done in both cgame and game (BG code)
kataMove 0 - if set, player will execute this move when they press both attack buttons at the same time (see list below for valid values)
lungeAtkMove 0 - if set, player will execute this move when they crouch+fwd+attack (see list below for valid values)
jumpAtkUpMove 0 - if set, player will execute this move when they jump+attack (see list below for valid values)
jumpAtkFwdMove 0 - if set, player will execute this move when they jump+fwd+attack (see list below for valid values)
jumpAtkBackMove 0 - if set, player will execute this move when they jump+back+attack (see list below for valid values)
jumpAtkRightMove 0 - if set, player will execute this move when they jump+rightattack (see list below for valid values)
jumpAtkLeftMove 0 - if set, player will execute this move when they jump+left+attack (see list below for valid values)
//NOTE: these "move" fields refer to saber moves that are defined in code. Set to LS_NONE to have the normal move removed, set to one of the following values to override the current move
LS_NONE - Do a regular attack instead of a special move (overrides the usual special move with a normal attack)
// Attacks
LS_A_TL2BR
LS_A_L2R
LS_A_BL2TR
LS_A_BR2TL
LS_A_R2L
LS_A_TR2BL
LS_A_T2B
LS_A_BACKSTAB
LS_A_BACK
LS_A_BACK_CR
LS_ROLL_STAB
LS_A_LUNGE
LS_A_JUMP_T__B_
LS_A_FLIP_STAB
LS_A_FLIP_SLASH
LS_JUMPATTACK_DUAL
LS_JUMPATTACK_ARIAL_LEFT
LS_JUMPATTACK_ARIAL_RIGHT
LS_JUMPATTACK_CART_LEFT
LS_JUMPATTACK_CART_RIGHT
LS_JUMPATTACK_STAFF_LEFT
LS_JUMPATTACK_STAFF_RIGHT
LS_BUTTERFLY_LEFT
LS_BUTTERFLY_RIGHT
LS_A_BACKFLIP_ATK
LS_SPINATTACK_DUAL
LS_SPINATTACK
LS_LEAP_ATTACK
LS_SWOOP_ATTACK_RIGHT
LS_SWOOP_ATTACK_LEFT
LS_TAUNTAUN_ATTACK_RIGHT
LS_TAUNTAUN_ATTACK_LEFT
LS_KICK_F
LS_KICK_B
LS_KICK_R
LS_KICK_L
LS_KICK_S
LS_KICK_BF
LS_KICK_RL
LS_KICK_F_AIR
LS_KICK_B_AIR
LS_KICK_R_AIR
LS_KICK_L_AIR
LS_STABDOWN
LS_STABDOWN_STAFF
LS_STABDOWN_DUAL
LS_DUAL_SPIN_PROTECT
LS_STAFF_SOULCAL
LS_A1_SPECIAL
LS_A2_SPECIAL
LS_A3_SPECIAL
LS_UPSIDE_DOWN_ATTACK
LS_PULL_ATTACK_STAB
LS_PULL_ATTACK_SWING
LS_SPINATTACK_ALORA
LS_DUAL_FB
LS_DUAL_LR
LS_HILT_BASH

//***these values can be specified differently for different blades (see "bladeStyle2Start" below for more info)***

//done in cgame (client-side code)
noWallMarks 0 - if 1, stops the saber from drawing marks on the world (good for real-sword type mods)
noDlight 0 - if 1, stops the saber from drawing a dynamic light (good for real-sword type mods)
noBlade 0 - if 1, stops the saber from drawing a blade (good for real-sword type mods)
noClashFlare 0 - if non-zero, the saber will not do the big, white clash flare with other sabers
trailStyle 0 - default (0) is normal, 1 is a motion blur and 2 is no trail at all (good for real-sword type mods)
g2MarksShader none - if set, the game will use this shader for marks on enemies instead of the default "gfx/damage/saberglowmark"
hitSound1 - hitSound3 none - if set, plays one of these 3 sounds when saber hits a person - NOTE: must provide all 3!!!
blockSound1 - blockSound3 none - if set, plays one of these 3 sounds when saber/sword hits another saber/sword - NOTE: must provide all 3!!!
bounceSound1 - bounceSound3 none - if set, plays one of these 3 sounds when saber/sword hits a wall and bounces off (must set bounceOnWall to 1 to use these sounds) - NOTE: must provide all 3!!!
blockEffect none - if set, plays this effect when the saber/sword hits another saber/sword (instead of "saber/saber_block.efx")
hitPersonEffect none - if set, plays this effect when the saber/sword hits a person (instead of "saber/blood_sparks_mp.efx" in MP and "sparks/blood_sparks2" in SP)
hitOtherEffect none - if set, plays this effect when the saber/sword hits something else damagable (instead of "saber/saber_cut.efx")

//done in game (server-side code)
knockbackScale 0 - if non-zero, uses damage done to calculate an appropriate amount of knockback
damageScale 1 - scale up or down the damage done by the saber
noDismemberment 0 - if non-zero, the saber never does dismemberment (good for pointed/blunt melee weapons)
noIdleEffect 0 - if non-zero, the saber will not do damage or any effects when it is idle (not in an attack anim). (good for real-sword type mods)
splashRadius 0 - radius of splashDamage
splashDamage 0 - amount of splashDamage, 100% at a distance of 0, 0% at a distance = splashRadius
splashKnockback 0 - amount of splashKnockback, 100% at a distance of 0, 0% at a distance = splashRadius
alwaysBlock 0 - if set, the blades will always be blocking (good for things like shields that should always block)
noManualDeactivate 0 - if set, the blades cannot manually be toggled on and off (does not affect turning the whole saber on/off, just hitting the saber style cycle button when using dual sabers or a multi-blade saber)

//***The following can be different for the extra blades - not setting them individually defaults them to the value for the whole saber (and first blade)***
//***NOTE: you can only have a maximum of 2 "styles" of blades, so this next value, "bladeStyle2Start" is the number of the first blade to use these value on... all blades before this use the normal values above, all blades at and after this number use the secondary values below***
bladeStyle2Start 0 - if set, blades from this number and higher use the following values (otherwise, they use the normal values already set)

//done in cgame (client-side code)
noWallMarks2 0 - if 1, stops the saber from drawing marks on the world (good for real-sword type mods)
noDlight2 0 - if 1, stops the saber from drawing a dynamic light (good for real-sword type mods)
noBlade2 0 - if 1, stops the saber from drawing a blade (good for real-sword type mods)
noClashFlare2 0 - if non-zero, the saber will not do the big, white clash flare with other sabers
trailStyle2 0 - default (0) is normal, 1 is a motion blur and 2 is no trail at all (good for real-sword type mods)
g2MarksShader2 none - if set, the game will use this shader for marks on enemies instead of the default "gfx/damage/saberglowmark"
hit2Sound1 - hit2Sound3 none - if set, plays one of these 3 sounds when saber hits a person - NOTE: must provide all 3!!!
block2Sound1 - block2Sound3 none - if set, plays one of these 3 sounds when saber/sword hits another saber/sword - NOTE: must provide all 3!!!
bounce2Sound1 - bounce2Sound3 none - if set, plays one of these 3 sounds when saber/sword hits a wall and bounces off (must set bounceOnWall to 1 to use these sounds) - NOTE: must provide all 3!!!
blockEffect2 none - if set, plays this effect when the saber/sword hits another saber/sword (instead of "saber/saber_block.efx")
hitPersonEffect2 none - if set, plays this effect when the saber/sword hits a person (instead of "saber/blood_sparks_mp.efx" in MP and "sparks/blood_sparks2" in SP)
hitOtherEffect2 none - if set, plays this effect when the saber/sword hits something else damagable (instead of "saber/saber_cut.efx")

//done in game (server-side code)
knockbackScale2 0 - if non-zero, uses damage done to calculate an appropriate amount of knockback
damageScale2 1 - scale up or down the damage done by the saber
noDismemberment2 0 - if non-zero, the saber never does dismemberment (good for pointed/blunt melee weapons)
noIdleEffect2 0 - if non-zero, the saber will not do damage or any effects when it is idle (not in an attack anim). (good for real-sword type mods)
splashRadius2 0 - radius of splashDamage
splashDamage2 0 - amount of splashDamage, 100% at a distance of 0, 0% at a distance = splashRadius
splashKnockback2 0 - amount of splashKnockback, 100% at a distance of 0, 0% at a distance = splashRadius
alwaysBlock2 0 - if set, the blades will always be blocking (good for things like shields that should always block)
noManualDeactivate2 0 - if set, the blades cannot manually be toggled on and off (does not affect turning the whole saber on/off, just hitting the saber style cycle button when using dual sabers or a multi-blade saber)
//================================================== ================================================== =====================================

Hope it helps.