Note: LucasForums Archive Project
The content here was reconstructed by scraping the Wayback Machine in an effort to restore some of what was lost when LF went down. The LucasForums Archive Project claims no ownership over the content or assets that were archived on archive.org.

This project is meant for research purposes only.

PC Wizkids. Aid me in my time of need!

Page: 1 of 1
 Ice Man
07-15-2001, 8:24 PM
#1
Okay my PII 400 froze up earlier this morning. I then reached for the reset button and pushed it. But instead of rebooting the way I was accustomed to, the screen remained blank. There wasn't the tradional whirring sound of the starting up of the computer. The computer also would not actually turn OFF! I pressed the power button several times and tried the reset button as well. Even the slightly less recommendable pulling out of the plug in the wall.
Well the last one did turn the PC off but when I stuck the plug back in the computer was as before: On, but not running properly. It wasn't starting up.
My dad believes this is a hard drive failure. The hard drive is an 8.4 GB Maxtor drive that's 2 and a half years old. Could this be it? Would a new hard drive fix this problem. Your expert opinions?
 Seryl Cann
07-15-2001, 9:28 PM
#2
If it's a harddrive failer you should still get something on your screen (the video card stuff, the bios stuff and the memory check). I think it's either something with your videocard or your motherboard or your processor.
 Boba Rhett
07-15-2001, 9:29 PM
#3
Well, I doubt it would hurt. :D

Seriously though, my brother had almost the exact same problem and we assumed it was the hdd also but we tried reseating everything and it fixed the problem. You might wanna give that a try.

I guess that's not much help but it's all I got. :o

[ July 15, 2001: Message edited by: Boba Rhett ]
 matt--
07-15-2001, 9:56 PM
#4
boba...you mean reseating, right? I'm give that a try once I done feeling anger towards my 1.333 thats out of commission.
 Boba Rhett
07-15-2001, 10:04 PM
#5
Yeah, that's what I meant. I wish my comp had a stupidity checker. ;)
 Ice Man
07-16-2001, 12:29 AM
#6
Well the monitor was automatically going on standby because there was no computer activity. The graphics card is only about half a year old. When we took the signal cable out the monitor began displaying properly again "No Signal" or something of the like. Any other ideas? Because unless we find out that the problem lies somewhere other than the HD, we'll be buying a new one by the end of the week. Guys, this is inmportant...Any other suggestions?
 OnlyOneCanoli
07-16-2001, 12:48 AM
#7
Um... don't buy another hard drive unless you want one just to have more space. This probably isn't the problem. If it was the hard drive, you'd still be able to turn it on and at least get to the BIOS. Seems to me like your motherboard crapped out. Other problem could be the processor. Possibily video card.

Open up the cards and make sure everything is seated properly. Make sure the motherboard is screwed down and everything. Make sure IDE cables and power supply cables are ok. Put case together, and then check that the wires are correctly attached. Also, you may want to run a continuity test to see if you're getting power... it might not be the computer at all.
 matt--
07-16-2001, 12:57 AM
#8
Do the fans go one? Does it beep?
 Ice Man
07-18-2001, 1:38 PM
#9
All is well now. My dad put the HD back in and things seem to work now. That was weird. Thanks for you help anyway.
Page: 1 of 1